The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA is the tallest RV ladder we currently have available at 99-1/2 inches. view full answer...
We only have one RV exterior ladder available in black and that is the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA. The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA is a universal RV ladder that can be attached to an RV with either a contoured or straight rear wall. It is 99-1/2" tall (customizable) x 12" wide but can be cut to the length that you need.
Unfortunately RV ladders are not a standardized part, there is really no way for me to know if or what ladder... view full answer...
As long as you can attach the Stromberg Carlson Ladder Mount Bike Rack part # LA-102 to the rungs of the ladder that are permanently to the RV yes you can use this rack. view full answer...
I have a great recommendation for you. I recommend the Stromberg Carlson RV Exterior Ladder w/ Hinges, # LA-401 that is 99-1/2" and the add the Stromberg Carlson RV Ladder Extension, # LA-148.
The Stromberg Carlson's universal RV ladder can be attached to an RV with either a contoured or straight rear wall and the legs of the ladder can be trimmed for length with a hacksaw or tube cutter. Then add the Stromberg Carlson RV Ladder Extension, # LA-148 when needed that provides an extra 48"... view full answer...
We do offer a range of RV exterior ladders that are general-purpose replacements that will work on many trailers and RVs, but none of these is a custom-fit item intended as an exact OEM replacement for any particular unit. RV makers may change ladder suppliers and such items are not usually branded.
All exterior ladders we offer are shown on the linked page, the tallest of which are the Stromberg Carlson 99-1/2-inch models # LA-401BA and # LA-401. For an exact replacement your best bet... view full answer...
If your Four Winds RV does not offer an exterior ladder on the back it is possible that the reason is because there is no suitable mounting location strong enough to support a ladder. However based on my research it looks like most Four Winds RVs have exterior ladders.
When installing mounting brackets and support pegs for a ladder like the install components of the Stromberg Carlson Ladder part # LA-401, you will want to make certain that all screws are fastened to the RV's blocking or... view full answer...
I cannot confirm that the Replacement Plastic Ladder Rung End Cap on Stromberg Carlson RV Exterior Ladder - Qty 1, # 8540-CP will fit your Kemberly Inc. RV ladder. However, the rough measurements are 2 inches in length by 5/8 inch wide and 1 inch deep. With this being a contoured piece, the measurements are close and hopefully enough for you to determine if it will fit or not. view full answer...
An RV bunk ladder is only designed for the interior of an RV for bunk beds, and due to that it doesn't have a way that will safely be able to mount to the exterior of an RV or have bottom support legs. So what I recommend instead is the Stromberg Carlson RV Exterior Ladder # LA-401.
This ladder is 99-1/2" tall x 12" wide but the length can be customized because the legs can be cut so you can make it a shorter length like the bunk ladders. More importantly, it is designed to mount to an... view full answer...
The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401 referenced in your question is a universal designed ladder and does not have a specific RV fit guide. The ladder is designed to work with most RVs on the market.
This is a very nice ladder that will provide a weight capacity of 250 pounds and at full length measures 99-1/2 inches tall and 12 inches wide. The legs on the ladder can be trimmed for length with a tube cutter or hacksaw, depending on the height you will need for your... view full answer...
I looked up pictures of the back of your Elkridge RV model E299 and it has a square back that the Stromberg Ladder part # LA-401 would fit and work well on.
The legs of the ladder can be trimmed for length with a hacksaw or tube cutter. When you are installing mounting brackets and support pegs, make certain that all screws are fastened to the RV's blocking or subframe on roof. If you are uncertain if your RV has backing installed, you should contact your RV manufacture to confirm. It... view full answer...
We have 2 ladder standoffs with square bases, the Replacement Stand-Off Brace for Surco Universal Exterior RV Ladders # SPN-416, and the Replacement Ladder Support Peg for Stromberg Carlson RV Exterior Ladder # 8535 you referenced.
They both have the same dimensions, which you can see from the attached photo. They have overall length of about 5 inches, so the ladder would about 5 inches away from the back of the RV not 6 inches like you measured. To get the 6 inches you need, you could... view full answer...
The Stromberg Carlson RV Exterior Ladder with Hinges # LA-401 can be customized to fit each RV's needs. I spoke with my contact at Stromberg Carlson and she said they do not have a minimum length requirement for the ladder, so you can modify the ladder to the 56 inches you are wanting.
One thing to keep in mind when cutting the ladder is to maintain an equal spacing between the ladder rungs. view full answer...
The Replacement Swivel Hinges for Surco Exterior RV Ladder # SPN-422 are designed to work with the Surco Exterior RV Ladder # SP501L and is not intended to work with your Surco Exterior RV Ladder # SP502L.
However, the tubing on this hinge measures .85" inside, and is about 1" long so in theory if your current hinge has matching dimensions this should work.
Attached is a diagram of these measurements for you to check out. view full answer...
If your original ladder was 84-1/4 inches long, the Surco Universal Exterior RV Ladder # SP502L would work well for you.
I don't have access to any reference material that would tell me which ladder would have originally been used on your 1999 Four Winds RV.
If you click the provided link, you can see the varying heights of Exterior RV ladders we offer, which range in height from 84-1/2 to 99-1/2 inches in total height.
To determine the correct ladder, measure from the top of the RV... view full answer...
We currently only carry two sizes of RV exterior ladders, a 84-1/2" ladder and 99-1/2" ladder. You would need to measure your current ladder to determine if either of these sizes would work for your 2016 Winnebago Via Motorhome.
Surco Universal Exterior RV Ladder - 84-1/2" Long # SP502L.
Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black # LA-401BA.
Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" Tall x 12" Wide # LA-401.
These... view full answer...
Looks like you are interested in a ladder rack extension for your RV.
The Stromberg Carlson RV Ladder Extension, part # LA-148 adds an additional 48 inches of length to your RV ladder. It is a simply no-tool installation by using the included rubber straps and attaching them to a 1 inch diameter vertical supports. This is 48 inches long and 14 inches wide and has a weight capacity of 300 lbs. view full answer...
I looked up pictures of the back of your 2003 National Seaview and it appears to have a pretty standard RV ladder that's on the taller side with a slight bend in it for the contour of the rear of the RV. So our best option will be the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401 as it's our tallest option at 99-1/2 inches and has a hinge to allow the ladder to bend with the shape of the rear of the RV. view full answer...
I have available three choices for an RV exterior roof ladder.
The Stromberg Carlson RV Exterior Ladder, part # LA-401, is a universal ladder that will fit RVs with either a contoured or a straight rear wall. It is 99-1/2 inches tall, can be customized for anything shorter than 99-1/2 inches. It is 13 inches wide and the distance between the rungs is 12 inches. The stand-offs can be positioned anywhere along the ladder for additional strength.
The other two choices are made by Surco... view full answer...
The Stromberg Carlson RV Exterior Ladder w/ Hinges, # LA-401BA for black or, # LA-401 in aluminum finish sounds like a great option to replace your current ladder. It has similar dimensions of 99-1/2" tall. This ladder is also supported with many replacement parts if needed in the future, hopefully preventing the need for complete replacement and expense associated with that. See link below.
Please keep in mind that the RV exterior ladders we offer are not exact OEM replacements but are... view full answer...
We do carry the Stromberg Carlson RV Exterior Ladder - Black, part # LA-401BA. This ladder has a weight capacity of 250 pounds, and has a customizable length. Considered a universal fit, this ladder will fit to either contoured or straight RV rear walls. view full answer...
Go To Results